Guide · Weight & Balance
A practical guide for weight & balance and load control teams: what Edition 47 of the IATA Airport Handling Manual says, what data the AHM 565 adds, how approval works, and what to gather first.
The change
Chapter 5 of the AHM Edition 47 no longer lists an AHM 560. Instead, the AHM 564 explains how the AHM 560 data elements are reorganized into the AHM 565, in a new sequence, with some blocks expanded and new data added. It also says that the AHM 565 should be completed instead of the AHM 560, even for non-complex weight & balance.
The AHM 561, which covers the approval of DCS weight & balance data by the AOC holder, recommends the AHM 565 or X565 format for the data an operator submits to its DCS.
Is there a deadline? We did not find a cut-off date in these sections. Your DCS provider and your authority may set their own requirements, so confirm the timing with them.
Formats
The AHM 565 is the set of semi-permanent data sheets for an EDP system. The X565 carries that data as XML, so it can be exchanged between manufacturers, airlines and DCS providers and imported by DCS and EFB applications. IATA also provides an Excel-based X565 Editor to view, modify and export these files.
The AHM 565 says all weight & balance software providers should be able to import and export X565. Each file carries a master effective date and time.
Structure
You prepare one set of sheets per aircraft type, with extra sheets per seating configuration and load configuration, and per registration where data differs. Only applicable data is included: an omitted table means it does not apply or is not required for that type.
New data
The AHM 560 maps into the AHM 565, but mapping alone does not complete it. According to the AHM 564, these items are new:
Check the section letters. The introduction of the AHM 564 places ULD compatibility in Section F, while the AHM 565 sheets use F for limiting weights and G for ULD compatibility. Follow the sheets.
Approval
The AHM 561 separates the approval of the system's functionality from the approval of each aircraft type's data. For a type, the process runs in three stages:
Approval then continues. The operator is responsible for any required periodic checks, and the period can be defined by the operator or in line with regulatory authorities. The AHM 561 also says the operator should verify the integrity of computerized mass and balance data and documents at intervals of no more than six months. A single-value update, such as a new basic weight after a reweigh, follows a shorter path than a combined change, such as a new cabin layout or cargo loading system.
Preparation
This guide summarizes our reading of the IATA Airport Handling Manual, Edition 47. It does not replace the manual, your approved procedures or your authority's requirements. Avia Solutions is not affiliated with IATA.
Need a hand?
See what we deliver: the AHM 565, the X565 and the substantiation behind every value.